Advertisement
I can't access the internet.
•
Choose "Network Connect," "Manual Connection," then "Disconnect" and click on
"Submit."
•
Choose "Network Connect," "Manual Connection," then "Connect" and click on
"Submit."
•
Please wait for 1-2 minutes while the modem is trying to connect to the network. Do not
click on other links.
Once done, click on "System Info." If the wireless broadband modem is connected,
reconfigure the modem to Auto-connect and switch off the modem and then turn it back
on again.
•
If you're plugged in, the connection indicator on your PC RJ45 port or LAN card should be lit
permanently.
•
Make sure that you are using the RJ45 cable provided in the modem pack. Otherwise, please use
a substitute CROSS RJ45 cable.
14
Advertisement
