HTC Desire 600c User Manual page 152

152 Internet connections
3. Tap Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi‑Fi router.
To use the Wi‑Fi Protected Setup (WPS) PIN method, tap
Disconnecting from the current wireless network
1. Slide the Notifications panel open, and then tap
2. Tap Wi-Fi.
3. You can:
§ Tap the wireless network that HTC Desire 600c is connected to, and then
tap Disconnect.
§ If you want to remove the settings for this network, press and hold the
network name, and then tap Forget network.
Connecting to a different Wi‑Fi network
1. Slide the Notifications panel open, and then tap
2. Tap Wi-Fi. Detected Wi‑Fi networks are displayed.
To manually scan for available Wi‑Fi networks, tap
3. Tap a Wi‑Fi network to connect to it.
Logging into a public Wi‑Fi network automatically (WISPr)
You can set HTC Desire 600c to automatically log into a public Wi‑Fi network that
you regularly use. This saves you the trouble of going through the Wi‑Fi provider's
web authentication every time you connect to their Wi‑Fi network. Just add your login
credentials to the WISPr (Wireless Internet Service Provider roaming) settings.
The access point of the Wi‑Fi network needs to support the WISPr web portal.
Consult the Wi‑Fi provider for details.
1. Slide the Notifications panel open, and then tap
2. Tap Wi-Fi.
3. Tap > Advanced.
4. Under WISPr settings, select the Auto login option.
5. Tap WISPr account settings > Add a new account.
6. Tap each item onscreen to enter the service provider name, your login name
(with the full domain name), and password.
> WPS Pin Entry.
.
.
> Scan.
.