Installing Join Me - Zte Telstra T6 User Manual

Installing Join Me

12.2
Please install the Join Me CD before connecting the phone to the computer.
• Insert the CD provided into the computer
• The CD will auto-start after a few seconds
• If auto run does not start then run Setup.exe from the CD
• The installation shield will launch and guide you through the installation
• Please follow the prompts to install the software
• When the installation is complete plug the handset into the computer using the USB lead supplied
• The USB lead is unique and should not be used for other devices (It is not the same as digital
camera leads)
• When the handset is plugged in the computer will automatically install the drivers. If this fails
consult our website for more help or access Windows Device Manager to update the drivers. See
www.zte.com.au for instructions
Note
If the phone is connected to the computer before installing the CD then the drivers will not be installed
correctly.
• Unplug the phone, un-install then re-install Join Me
• See www.zte.com.au for more assistance
57