Advertisement
BBQ-PRO Charcoal Grill Assembly Instructions
STEP 3: Before attaching wire rack (K)
D
make sure that the short axles are facing
K
the front. Attach wire rack (K) to stationary
legs (D) by inserting the short axles of wire
rack (K) through holes in front legs (D).
Attach wire rack (K) to wheel legs (E)
G
by inserting the long axles of wire
rack (K) through wheel legs (E), 2
E
wheels (G), 2 plastic washers (11)
G
and screw 2 locknuts (8).
Tighten all leg bolts and wheel axle nuts.
STEP 4: Attach bottom bowl
damper (I) to the front of bottom
bowl (B). Make sure that the small
handle on the bottom bowl damper
(I) is facing away from the bottom
bowl (B). For the bottom bowl
damper (I) use 2 bowl damper bolts
I
(4), 4 fiber washers (9) and 2 winged
nuts (7). Make sure when tightening
that the bottom bowl damper (I) can
move side to side.
Attach handle (J) to bottom bowl (B)
J
by using two handle bolts (2), two
metal washers (10) and 4 fiber
washers (9). Tighten handle bolts (2)
into handle (J).
Page 5
Customer Service-1-877-998-1697
Advertisement
