Sony DVP-NS710H Operating Instructions Manual page 37

.OTS
Selects the type of OTS audio signals.
OFF
Select this when the player is
- -
connected to an audio
component without a built-in
DTS decoder.
ON
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
"
• When you playa DVD VIDEO with DTS sound
tracks, set "OTS" to "ON" in "AUDIO SETUP"
(page 37).
• If you connect the player to audio equipment
without a OTS decoder, do not set "OTS" to "ON"
in "AUDIO SETUP" (page 37). A loud noise may
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
• If the HOMI OUT jack is connected to equipment
not compatible with OTS signals, the "OFF'
signals will be automatically output even when
you select "ON."
• 48kHZ/96kHz PCM (OVO VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHzl16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHzl24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
"
• The analog audio signals from the LINE OUT
LIR (AUOIO) jacks are not affected by this
setting and keep their original sampling frequency
level.
• If
the HOMI OUT jack is connected to equipment
not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit peM will be automatically output
even when you select "96kHz/24bit."
HOMI
SETUP
You can adjust items related to the HOMI
connection.
• HOMI RESOLUTION
Selects the type of video signals output from
the HOMI OUT jack. When you select
AUTO (1920x I080p) (default), the player
outputs video signals of the highest resolution
acceptable for your TV. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TVIprojector, etc. For details, refer also to the
instruction manual supplied with the TV I
projector, etc.
You cannot select this when "PhotoTV HO"
mode is activated (page 30).
AUTO
Normally, select this.
(1920x 1080p)
1920x1080i Sends 1920x I080i video
signals.
1280x720p Sends I280x720p video
signals.
720x480p
Sends 720x480p video signals.
To reset the setting
If the picture does not appear normal or goes
blank, press
1/6
to tum off the player, and
enter "369" using the number buttons on the
remote, then press
1/6
to tum on the player
again.
"
I n case of "AUTO (\ 920x 1080p)," the player
automatically adjusts the video signals that are
suitable for the TV.
Other cases, the player directly send the signal even
if TV cannot accept.
• JPEG RESOLUTION
Selects the type of JPEG resolution so that
you can enjoy high picture quality via your
HOMI connection.
You cannot select this when "HOMI
RESOLUTION" is set to "720x480p" or "TV
TYPE" is set to "4:3 LETTER BOX" or "4:3
PAN SCAN."
PhotoTV HD
Displays extra highly-detailed
picture when connecting to a
Sony's "PhotoTV HD"-
compatible device.
. .continued
37
us