Sony DVP-NS710H Operating Instructions Manual page 16

16
US
6
Press
1'/""
to select the setting that
matches your TV type.
• If you have a wide-screen TV or a
4:3
standard TV with a wide-screen mode
• 16:9 (page 33)
• If you have a
4:3
standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 33)
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
8
Press
1'/""
to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
Select "NO," if you do not connect an
audio component, then go to step 12.
Select "YES: LINE OUTPUT LIR
(AUDIO)," if you connect an audio
component using an audio cord, then go
to step 12.
Select "YES: DIGITAL OUTPUT," if
you connect an audio component using a
digital coaxiaUHDMI cord.
9
Press
1'/""
to select the type of
Dolby Digital signal to your audio
component.
If your audio component has a Dolby
Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
1
OPress ENTER.
"DTS" is selected.
11
Press
1'/""
to select whether or
not to send a DTS signal to your
audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
12Press ENTER.
Quick Setup is finished and connections
are complete.
"
W hen "PhotoTV HD" mode is activated (page 30),
the selection for "TV TYPE" is skipped.