Sounds - Kyocera Tomo S2410 User Giude

Set Backlight Duration
Use Backlighting to minimize the bright time
and maximize the battery life.
From Backlighting, select one of the
following:
• Always Dim forces the backlight to remain
dim before turning off.
• 7 Seconds, 10 Seconds, 15 Seconds, or 30
Seconds turns backlighting on for the set
time after your last keypress.
• Always Bright forces the backlight to
remain bright before turning off.
Set Brightness
1. From Brightness, scroll to change the
brightness level.
2. Select Save.
Set Contrast
1. From Contrast, scroll to change the
contrast level.
2. Select Save.
Set Time and Date Format
From Time/Date Format, select a time and
date format.
Set Language
From Language, select a language.
Note: Some applications on the device do not
support all languages.
62

Sounds

Your phone has several settings that control the
sound. You can select from a variety of ringers
and adjust the volume.
Ringers
From Ringers, you can modify the following
settings.
Set Ringers
From Ringer Type, select a ringer. (Scroll
down the list to play the ringers.)
Enable Roam Ringer
From Roam Ringer, select Enabled to
activate a specific ringer for roaming calls.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or light up when you
receive calls and alerts.
From Ringer Mode, select one of the
following:
• Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
• Vibrate Only vibrates for the duration of
the incoming call or other alerts.
Sounds