Disabling And Enabling Web Page Access; Device Information - Cisco 6921 Administration Manual

Chapter
•

Disabling and Enabling Web Page Access

For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you
will prevent access to the web pages that are described in this chapter and to the Cisco Unified CM User
Options web pages.
To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications
Manager Administration.
Procedure
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3 Click the device name to open the Phone Configuration window for the device.
Step 4 Scroll down to the Product Specific Configuration section. From the Web Access drop-down list box,
choose Disabled.
Step 5 Click Update.
Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone
web pages. Disabling web access also affects any serviceability application that relies on web access,
such as CiscoWorks.
To enable web page access when it is disabled, see the preceding steps about disabling access. Follow
the same steps, but choose Enabled in

Device Information

The Device Information area on a phone's web page displays device settings and related information for
the phone.
To display the Device Information area, access the web page for the phone as described in the
"Accessing the Web Page for a Phone" section on page
hyperlink.
Table 8-1
Item
MAC Address
Host Name
Phone DN
App Load ID
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Streaming Statistics—Includes the following hyperlink:
Stream 1—Displays a variety of streaming statistics. For more information, see the
–
Statistics" section on page
Table 8-1 describes these items.
Device Information Area Items
Description
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on its MAC
address
Directory number assigned to the phone
Identifier of the firmware running on the phone
8-10.
Step 4 to enable the web page.
8-2, and then click the Device Information
Disabling and Enabling Web Page Access
"Streaming
8-3