Formatting Memory Cards; Screen Brightness - Canon PowerShot ELPH 120 IS IXUS 135 Getting Started

Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed
z Choose [Power Saving], and then press
the <m> button.
z
After choosing an item, press the
<q><r> buttons to adjust it as needed.
•
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
(= 108) to [On].

Screen Brightness

Adjust screen brightness as follows.
z Choose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
(= 25).
• For maximum brightness, press and hold the <p> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override he [LCD Brightness] setting on the [3] tab.) To restore
the original brightness, press and hold the <p> button again for at least one
second or restart the camera.
Hiding the Start-up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z Choose [Start-up Image], and then
choose [Off].

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
1
Access the [Format] screen.
z Choose [Format], and then press the
<m> button.
Cover Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7 7
Setting Menu Setting Menu
8
Accessories
9
Appendix
Index
109