Shooting With Color Swap - Canon PowerShot ELPH 120 IS IXUS 135 Getting Started

Shooting with Color Accent
Choose a single image color to keep and change other colors to black and white.
1
Choose [T].
z Follow steps 1 – 2 in "Specific Scenes"
(=
2
Access the setting screen.
z Press the <p> button.
X The original image and the Color Accent
image are displayed one after another.
X By default, green is the color that will be
kept.
3
Specify the color.
z Position the center frame over the color
to keep, and then press the <q> button.
X The specified color is recorded.
4
Specify the range of colors to
keep.
Recorded Color
z Press the <o><p> buttons to adjust the
range.
z To keep only your specified color, choose
a large negative value. To keep colors
similar to your specified color as well,
choose a large positive value.
z Press the <m> button to return to the
shooting screen.
5
Shoot.
Still Images Movies
45) and choose [T].
•
Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.

Shooting with Color Swap

You can replace one image color with another before shooting. Note that
only one color can be replaced.
1
Choose [Y].
z Follow steps 1 – 2 in "Specific Scenes"
(=
2
Access the setting screen.
z Press the <p> button.
X The original image and the Color Swap
image are displayed one after another.
By default, green will be replaced with
X
gray.
3
Specify the color to replace.
z Position the center frame over the color
to replace, and then press the <q>
button.
X The specified color is recorded.
Still Images Movies
45) and choose [Y].
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
49