PREPARATION
STAND INSTRUCTIONS
Image shown may differ from your TV.
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV.
3
Assemble the parts of the CABLE
MANAGEMENT CLIP with the STAND
BODY.
4
Assemble the TV as shown.
5
Install the 4 screws into the holes shown.
!
NOTE
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
18
(For 50/60PK950)
(For 50PK950)
STAND BODY
M4 x 14
CABLE
MANAGEMENT
CLIP
M4 x 28
STAND BASE
STAND BODY