PREPARATION
STAND INSTRUCTIONS
ꔛ
Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV.
STAND BODY
M4 x 20
3
Assemble the TV as shown.
Fix the 4 screws securely using the holes in
4
the back of the TV.
M4 x 20
!
NOTE
►
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
16
tighten.
STAND BASE
(For 32/42/47/55LD650)
DETACHMENT
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the stand from TV.
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.