Operating The Tv; Select Channel - JVC BlackCrystal JLC-32BC3000 User Manual

Basic Operations
Scanning
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Scan Status:
Analog Channel:
Digital Channel:
OK
Note:
• Scanning may take some time to complete.
• Pressing OK will stop the auto scan.
9
When auto scan compelets, press OK to
continue.
Scan Finish
Channel scan completed.
Analog Channels:
Digital Channels:
OK
10
Press OK to complete setup.
Finish
Initial Setup has finished, please press "OK" to
exit Setup Wizard.
OK
16
0%
0
0
Stop Scan
Select
12
26
OK
Select RETURN Previous Setup INFO
OK
RETURN INFO
Select Previous Setup

Operating the TV

Select Channel

Press the number buttons to directly select
channels.
Note: After pressing the number buttons, there is a
few seconds delay before the TV changes channel.
To change to the channel right away, press ENT after
pressing the number buttons.
To Select Analog Channels
1~9
10~99
100~135:
To Select Digital Channels
Press the first 3 digits, then press
by the remaining number. Example, to select
channel 15-1, press 1, 5,
ENT.
Exit
To Select by Channel List
All channels with network signal are listed
on the Channel List screen. You can select
channels from this screen.
1
Press ENT to display the Channel List
screen.
2
Press
then press ENT.
3
Press RETURN to close the Channel List
screen.
Exit
To Browse Channel
CH
Press 1~9 as needed. Example,
to select channel 2, press 2, then
press ENT.
Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
_
, 1, then press
to select a channel number,
or
Press to scroll through the
channels manually.
_
, followed