Usb Setup - D-Link DSL-2750B User Manual

Section 3 - Configuration

USB SETUP

To configure the USB Device on the router, click USB Setup in the SETUP tab. Router can configure as a USB device server when you plug-in a
USB Storage device. Router can configure as a USB Printer server when you plug- in a USB Printer device. Router can connect to Internet via 3G
when you plug-in a 3G USB Modem.
Print Server: allows you to share your USB printer to all the
connected local hosts.
First connect your printer to the USB port. Then enter the data
below. Last, configure your local hosts (Add Printer Wizard) to
utilize this printer.
To configure USB port to Print Server setting, choose Enable
r
SharePort and Print Serve in the USB Setup page and
press Apply button,
And you also can share the USB printer or USB storage
device to all connect local hosts by SharePort Utility.
SharePort Utility manual shows in Appendix–G D-Link
SharePort™
.
D-Link DSL-2750B User Manual 53