Dolby Pro Logic Ii Effect; Asc (Auto Sound Calibration) Setup - Samsung HT-Z320 User Manual

system setup

DOLBY PRO LOGIC II EFFECT

This function works only in Dolby Pro Logic MUSIC mode.
1. Press the
2. Press the
3. Press the , buttons to select the desired effect setting.
PANORAMA : You can select either 0 or 1.
C- WIDTH : You can select between 0 and 7.
DIMENS : You can select between 0 and 6.

ASC (Auto Sound Calibration) SETUP

By setting the ASC function just once when you relocate or install the unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1-channel sound field optimized for your environment.
L: F S
RONT PEAKER
R: F S
RONT PEAKER
C: C S
ENTER PEAKER
SW: S
UBWOOFER
M

ASC SETUP can be made when there is no disc in the unit.

Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the
volume using the volume control buttons.

If the auto sound microphone is disconnected during the ASC setup, the setup will be
cancelled.

When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC ll/P. BASS sound
effects will not work.
To Verify the ASC
Briefly press the ASC button.
Distance and level values specified for each channel will appear in the display.
64
PL II MODE button to select MUSIC mode.
PL II EFFECT button.
(L) SL: R S
EAR PEAKER
(R) SR: R S
EAR PEAKER
(L)
(R)
ASC
Microphone