5. This is the completion of the suggested wall mount
installation.
▪
Do not hang onto the installed unit and avoid any impact to the unit.
▪
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause
an injury or damage to the product.
▪
When the unit is installed on a wall, please make sure that children not pull any of
connecting cables, as it may cause it to fall.
▪
For the optimal performance in a wall mount installation, keep the speaker system at least
2 inches (5 cm) distant from the TV.
SEPARATED SPEAKER WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
1. Fix the wall mount bracket on the desired position, with 2
screws (not provided).
2. Insert N and O vertically in the MAIN SET A and B,
respectively. Then, tighten screw E to the end of the
hole.
3. Insert D and K in this order into each of two center holes
(in the rear of each speaker assembly) as shown. Then,
tighten it.
• For separate type installations, two speakers require
cabling to the cradles' terminal tabs.
4. Then, fit the unit into the corresponding slots of the M
(Holder wall vertical). For secure installation, make sure
the mounting studs slide firmly down into the bottom of
the slots.
• Only the top side (part D) can be assembled when
installing speakers perpendicularly to the main set.
2 inches (5 cm) or more
A
MAIN SET (RIGHT)
B
SPEAKER (LEFT)
D
HOLDER-SCREW
E
SCREW
K
SCREW
M
HOLDER-WALL-VERTICAL
N
ASSY COVER P-CAP MAIN
O
ASSY COVER P-CAP SPK
M
K
D
B
A
O
N
E
15