Panasonic TX-24ASW504 Ehelp page 72

Single Cable:
When using the Single Cable router, up to 8 user bands are available.
You can receive several satellites if you have DiSEqC control antenna
●
system.
This TV supports DiSEqC Version 1.0.
●
3. Select LNB Configuration
4. Select LNB / Satellite
1) Set LNB first.
– If you set to
– If you set to
AB.
– If you set to
2) Set Satellite for the selected LNB.
– Select No Satellite
(Available satellite will be searched in
– Select User defined
– If you set to
Band, User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press BACK/RETURN
6. Select Auto Setup
7. Select Search Mode
8. Set with / and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
with / and press
with / and set with
One LNB, LNB is not selectable.
MiniDiSEqC or Single
DiSEqC 1.0, select from LNB AA, AB, BA and BB.
if you do not know the connected satellite.
to set Test Transponder Frequency
Single Cable, additional settings are required. Set
and
to store.
with / and press
/ Scan Mode with
OK to store.
Start scan with
- 72 -
OK to access.
/ .
Cable, select from LNB AA and
Auto Setup.)
PIN (depending on the Single
OK to access.
/ and press OK
/ and press OK
OK to start Auto
manually.
User
to access.
to search.
Setup.