✎
The wireless antenna transceivers and cables are included in
tthe display enclosure spare part kits, spare part numbers
412350-001 and 412349-001.
27. If it is necessary to replace the wireless transceivers and
cables, remove the two Phillips PM2.0×3.0 screws 1 that
secure the left and right transceivers to the display enclosure.
28. Release the retention tabs 2 built in to the display enclosure
lining that secure the wireless antenna cables to the display
enclosure.
29. Detach the wireless antenna transceivers 3 from the display
enclosure.
30. Remove the wireless antenna transceivers and cables 4.
Removing the Wireless Antenna Transceivers and Cables
Maintenance and Service Guide
Removal and Replacement Procedures
5–39