Break-In Period - Polaris 600 RUSH Owner's Manual

OPERATION

Break-In Period

Engine Break-In
Always follow these recommended break-in procedures for new or
rebuilt engines. The first tank of fuel is considered the break-in period
for the engine.
Premix the first tank of fuel as outlined below. Oil added to the fuel and
oil injection systems will provide the necessary engine lubrication.
First Tank of Fuel: POLARIS Premium 2-Cycle Semi-Synthetic Oil
After Break-in:
Tip: The semi-synthetic oil will seat the rings faster than the VES Gold Plus oil.
See page 109 for the part numbers of POLARIS products.
Never mix brands of oil. Serious chemical reactions can cause injection
system blockage, resulting in serious engine damage. Oils may also be
incompatible and the result could be sludge formation, filter blockage,
and reduced cold weather flow rates. All POLARIS oils are compatible
with each other.
Initial Fuel Premix
Always premix fuel in 5-gallon (19-liter) increments in a separate fuel
container. Never add oil directly to the fuel tank.
Fuel
Each 5 gal. (19 l)
62
Oil Recommendations
POLARIS VES Gold Plus Oil
Semi-Synthetic Oil
16 oz. (473 ml)
Ratio
40:1