UsbOperation - Jensen MP1514BT Owner's Manual

USBOPERATION

The unit contains a USB interface. The USB interface is located on the faceplate
beneath the protective cover. You can connect an USB memory device using this
interface.
1. Locate the Auxiliary Input Cover on the faceplate.
2. Lift the Auxiliary Input Cover to reveal the USB connector.
3. Insert the USB device into the USB connector. The unit will read the audio files
on the USB device automatically. "READING USB PLAY" appears on the display
panel then playback begins.
4. If the unit is in another mode of operation press the MODE button to select
USB mode.
Note: When in USB play mode, be sure not to remove the USB device from the USB
connector.
Note: The unit can only support a standard USB memory device. When connecting
an MP3 player that uses normal batteries (non rechargeable batteries), the
batteries should be removed from the MP3 player first and then connected to
the USB connector. Otherwise, damage to the batteries may result.
Auxiliary Input Cover
AUX Connector
USB Connector
MP1514BT
35