Ethernet Cable - Star Micronics TSP650II SERIES Hardware Manual

3-2-4. Ethernet Cable

To connect the cable, follow the procedure given below.
(1) Make sure that the AC adapter's power cord is not connected to the outlet.
(2) Connect the Ethernet cable to the Ethernet port.
Link disconnection detection feature
g
The Ethernet interface model is equipped with a link disconnection detection feature.
If the printer is turned on when an Ethernet cable is not connected to it, the POWER and ERROR lamps are simul-
taneously turned on and off at 4-second intervals to indicate the disconnection.
Be sure to connect the Ethernet cable from a PC or hub to the printer, and then turn the printer on.
Ethernet cable
IFBD-HE07
- 6 -