Attaching The Remote And Mounting Bracket - iHome 2GO Cycler iH85 User Manual

Attaching the Remote Clamp and Mounting Bracket
1:Mounting Remote Clamp To Handlebars
A
B
a) Using Phillips screw driver, open mounting clamp.
b) Wrap mounting clamp around handle bar. The square top
should face the bicycle seat
d) Tighten clamp using a Phillips screwdriver
3:Mounting Bracket
A
B
2:Attach Remote To Clamp
C
To attach the iH85 remote, slide the mounting slot on
back of the remote down the square top of the clamp
until it clicks. Press clip button to release. Do not leave
remote on bike when unattended.
Attaching the Mounting Bracket
a) Align bracket with existing bottle
b) Screw bracket firmly to down tube
To attach the iH85, slide it into the
bracket with the Power button
facing you and the speaker facing
up.
3
bracket holes on down tube
with hex (Allen) wrench until
securely fastened