Load The Battery - JVC GC-XA1 Basic User's Manual

Getting Started
1
Adapter charging mode
(Please use JVC
authenticated adapter
AC-V10LU)
Using one with an output higher
than 5 V risks breakdown.
1
1. Slide the latch and open the cover.
2. Insert the battery according to the correct
polarity marks (+ or -).
1. A blinking light will indicate active charging.
2. In adapter charging mode, the full charging time
for a depleted battery is about 5 hours and the
light will turn off automatically after the charging
is completed.
3. In PC USB charging mode, a longer charging
time is required.
1. Slide the latch and open the cover.
2. Insert the SD card (Optional) into the slot until
it locks properly.
PC USB 3. To remove the SD card, press inward to release
it and gently pull it out.
charging mode
ow to set the cloc
1. Press the MENU button
2. Select [Time Setting] and then press
for Year, Month, Day, Hour, and Minute.
3. P
Guide
1. Connect the camera to a computer.
2. Open [WiVideo
[Start.pdf]
Note: Adobe Reader must be installed to read PDF
Supported S card
-Panasonic

Load the battery

harge the Li ion battery
nsert the memory card
ress [SET ] to go for next.
] Drive, then double click
-TOSHIBA
/
-SanDisk