Placement Of Burner Heads And Caps; Placement Of Burner Grates - Electrolux 30” Gas Range Use & Care Manual

12
Surface Cooking

PlaceMent of buRneR Heads and caPs

For the 18 000 BTU burner:
Place the burner head over the gas orifice (Figure 1). Be careful not to damage the
electrode while placing the burner head over the orifice. Make sure electrode fits
correctly into slot in burner head.
Burner
Cap
Burner
Head
Gas
Opening
Electrode
Figure 1

PlaceMent of buRneR GRates

Place grates on the Ceramic Glass Cooktop. Be
sure they are right located inside the stainless
steel frame.
ATTENTION: Do not slide the grates on the
stainless steel frame, doing so can damage the
surface.
Burner
Cap
Burner
Head
Figure 2
For all burners:
Place a burner cap on each burner head
(see Figure 2), matching the cap size to
the head size. The cap for each burner
has an inner locating ring which centers
the cap correctly on the burner head. Be
sure that all the burner caps and burner
heads are correctly placed BEFORE
using your appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact
a Service Center. Do not service the
sealed burner yourself.
Figure 1