Panasonic KX-P7105 Operating Instructions Manual page 307

Settings and Printing
Unables to connect to NetWare Server in Print Server mode.
• Make sure the frame type is set correctly.
• KX-P7110 can switch to PSERVER and RPRINTER automatically, but it may take extra time
depending on the environment.
• If file server is defined to the KX-P7110, make sure the file server name is correct.
• Make sure the printer port name is correct. Make sure the same port name is assigned to the
KX-P7110 and NetWare server. If there are more than one KX-P7110 on the network, make
sure the assigned port name is unique.
• Make sure the same NetWare login password is set to the KX-P7110 and the file server.
• Make sure the machine name and print server name are the same.
Unables to Print.
• Make sure that the KX-P7110 is connected to the network correctly.
Trouble in Macintosh Environment
Unables to detect KX-P7110.
• Make sure that the KX-P7110 is connected to the network correctly.
• If the KX-P7110 is on the assigned zone, make sure the zone name is selected from
"Chooser" .
• Make sure the correct printer driver is selected.
• Make sure AppleTalk is checked as Available from the Chooser.
• Make sure AppleTalk in the control panel is the same environment as you are using.
NOTE
• When AppleTalk is selected, make sure EtherTalk is selected.
• When Network is selected, make sure EtherTalk is selected.
• Print out the Configuration Report and make sure the AppleTalk protocol is set to ENABLE.
The setting up can be done using Windows utility, or Macintosh utility.
• Print out the Configuration Report and make sure the EtherTalk port name is not assigned.
Shows "Not enough Memory" and unables to print.
• Application memory may not be enough. Click the application icon, select Information from
file menu, and increase memory size.
• Close any other running applications.
• Increase the available space of the hard disk of your computer.
Maintenance and Spec. Network
Network
Appendix
122