Alternate Audio Connections; Connecting To An A/V Receiver Or Amplifier Via Analogue Outputs - Oppo BDP-103EU User Manual

I N S T A L L A T I O N

Alternate Audio Connections

Connecting to an A/V Receiver or Amplifier via Analogue Outputs

• Please use up to 8 RCA-style audio interconnect cables (not included) to connect the FL (Front Left),
FR (Front Right), SL (Surround Left), SR (Surround Right), C (Centre), SW (SubWoofer), SBL
(Surround Back Left) and SBR (Surround Back Right) analogue output terminals of the BDP-103EU to
the corresponding multi-channel analogue audio input jacks of your A/V receiver or amplifier.
• If the A/V receiver or amplifier only has 5.1ch audio inputs, do not connect the SBL (Surround Back
Left) and SBR (Surround Back Right) terminals, and set the Down Mix option in the Setup Menu to
5.1 to make sure that any 7.1 channel signals are converted to 5.1 channels (refer to Down Mix Mode
on page 68).
• If your audio system offers only stereo audio inputs, or if you would like to connect a dedicated stereo
audio system in addition to the surround audio system which is already connected to the HDMI or
S/PDIF outputs, you can connect the dedicated stereo audio system to the FL (Front Left) and FR
(Front Right) terminals of the player.
• For the stereo outputs, if the audio system you are connecting to does not have surround speakers,
set the Down Mix option in the Setup Menu to Stereo. If the audio system has surround speakers
and Dolby Pro Logic or other surround audio decoding capabilities, set the down mix mode to "LT/RT".
(For more information, refer to "Down Mix Mode" on page 68).
Rear Panel
Audio Interconnect Cables
FRONT
Receiver/Amplifier with 7.1ch Audio Input
16
L
L L
CENTER
R
R R
SURROUND SUBWOOFER S. BACK
AUDIO/VIDEO MULTI-CHANNEL RECEIVER