Sapido BRD70n User Manual page 38

Item
Di sable Wireless
Band
Mode
Network Type
SSID
Channel Width
Control Sideband
Channel Number
Broadband SSID
WMM
Data Rate
Associate Clients
Enable MAC Clone
(Single Ethernet Client)
Enable Universal Repeater
Mode (Acting a s AP and
Client simultaneousl y)
SSID of Extended Interface
Multiple AP
Save & Apply
http://www.sapido.com.tw/
Description
Turn off the wireless service.
Select the frequency. It has 6 options: 2.4 GHz
(B/G/N/B+G/G+N/B+G+N).
Select the mode. It has 3 modes to select: (AP, Client, WDS,
AP+WDS).
Multiple AP: Please check Section 4.1.2.1.
* In Wi-Fi AP mode only support Client mode.

Infrastructure：one of the two methods for connecting to
wireless networks with Wi-Fi enabled devices such as
laptops, Pda's I-phone etc. These devices are connected to
wireless network with the help of Access point (AP). Wireless
Access Points are usually routers or switches which are
connected to internet by Ethernet port.

Ad hoc：By using ad hoc mode, devices are capable for
communicating directly with each other. No Access point
(routers / switches) is required for communication between
devic es and all devic es in the range connect in peer to peer
communication mode.
Service S et identifier, users can define to any or keep as default.
Please select the channel width, it has 3 options: 20MHz / 40MHz /
Auto
Enable this function will control your router use lower or upper
channel.
Please select the channel; it has Auto, 1, 2~11 options.
User may choose to enable Broadca st SSID or not.
Enable / Disable Wi-Fi Multimedia
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper level,
provide the bottom layer user link in wireless and wired way in the
meantime.
(The IP that bottom layer obtains is from upper level.)
While linking the upper level device in wireless way, you can set
SSID to give the bottom layer user search.
BRD70n can register up to 4 SSIDs (wireless LAN group).
It can be used as if there are multiple wireless LAN access
points with one product. Each SSID could be set with
different data rate, WMM and access type
Click on "Save" to save the setting data. The "A pply" button can
38
User Manual v1. 0.0