Meaning Of Symbols; Safety And Environmental Instructions - Philips DTR4610/08 User Manual

Philips digital terrestrial receiver user manual
Hide thumbs Also See for DTR4610/08:
Table of Contents

Advertisement

Available languages

Available languages

4610_A5_GB.qxp
09/06/2005

Meaning of symbols

Important information:
Must be read and understood.
The "Material recyclability symbol" means the package cardboard or User manual
paper is recyclable.
The "Material recyclability symbol" affixed on plastic parts means these parts are
recyclable.
The "Green Dot" affixed on cardboard means PHILIPS pays a financial duty to the
"Avoidance and Recovery of Packaging Waste" organization.
This receiver contains a large number of materials that can be recycled. If you are
disposing of an old receiver, please take it to a recycling centre.

Safety and environmental instructions

Your receiver has been manufactured to meet the appropriate safety standards, but the
instructions below should be followed to operate it safely.
These instructions must be kept for future reference.
- Before connecting the receiver to the mains, check that the mains supply voltage corresponds
to the voltage printed on the rear of the receiver. If the mains voltage is different, consult the
dealer.
- The receiver does not contain any user-serviceable parts. All maintenance work must be
carried out by qualified personnel.
- If you disconnect the receiver from the mains, make sure to unplug it from the wall socket and
not just from the AC socket at the back of the unit. Children could seriously injure themselves,
as the free end of the cable is still alive.
- Unplug the receiver during lightning storms.
- To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
- The receiver should be placed on a firm surface, and the ventilation openings must not be
covered with items such as newspapers, table clothes, curtains, etc.
- Do not install the receiver near any heat sources such as radiators, stoves or any other
apparatus that produces heat. Protect it from direct sunlight.
- When installing the receiver, ensure there is a gap of approximately 2.5 cm around the receiver
to enable air to circulate freely and prevent overheating.
- Leave accessible the mains connector at the back of the unit in case emergency shutdown is
required.
- Do not place any combustible objects on the receiver (candles, etc.).
- No objects filled with liquids, such as vases, should be placed on the unit. The receiver should
not be exposed to dripping or splashing. Should this happen, disconnect your receiver from the
mains and consult your dealer.
- Make sure that children do not place any foreign objects in any of the openings.
- For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth or aerosol cleaners.
15:33
Page 1
S A F E T Y I N S T R U C T I O N S 1

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dtr2610/08

Table of Contents