Noaa Reception; Reception Signal Status - Oregon Scientific WR203 User Manual

NOTE Once the location name is selected, the
corresponding FIPS code will be set into the memory.
You cannot convert the code back to the location name.
(FIPS is the Federal Information Processing System
number assigned to each State, or open waters in or
around the US. The SAME code comprises of numbers
generated by the FIPS system.)
Activate / deactivate location:
You can activate / deactivate 1, some, or all of your
stored locations.
When a location is activated, the 6-digit SAME code can
be viewed in your stored locations display.
When a location is deactivated, "---" can be viewed in
your stored locations display.
1. Press and hold to enter setting mode.
2. Press to navigate to Set Location.
3. Press to enter.
WR203_MANUAL.indd 8
4. Press to navigate to a stored location, e.g., C4
and press .
5. When 6 digit SAME code or "---" is blinking, press
to activate or deactivate it and press
confirm the setting.

NOAA RECEPTION

RECEPTION SIGNAL STATUS

Press NOAA to enter radio mode.
Green light indicates radio is on.
To change volume: Press
Reception signal status:
ICON DESCRIPTION
Currently selected channel
signal is strong
Currently selected channel
signal is weak
No NOAA alert message has
been received for 10 days.
Currently selected channel
signal is weak
No NOAA alert message has
been received for 10 days.
Currently selected channel
signal is strong
NOTE If NOAA radio is on, whether it be NOAA On,
Standby or Mute, unit will continually search for a
NOAA signal.
8
to
.
10/26/11 12:33:20