Power Source; Back-Up Power; Rechargeable Battery; Navigating Through Settings / Displays - Oregon Scientific WR203 User Manual

11. Clock / calendar / message
12. Radio frequency / volume
13. : back-up battery level indicator

POWER SOURCE

BACK-UP POWER

In cases where rechargeable battery power is low or
has no power, the unit will source its energy from the
back-up batteries.
Insert 3 AAA batteries:
1. Slide open battery compartment.
2. Insert the batteries matching the polarities.
indicates there is no back-up battery or back-up
battery is low.
It is recommended to insert back-up batteries in case of
power shortage during emergencies.

RECHARGEABLE BATTERY

This radio has a built-in rechargeable battery that can
store energy from different sources: a solar panel, a
manual hand crank or electricity via an adapter (not
included in package).
When rechargeable battery level is low, red LED
indicator light will flash.
1. Remove battery compartment cover.
2. Insert battery pack.
WR203_MANUAL.indd 5
3. Align holes in the connector with the pins, then push
connector in.
4. Tuck wires in and ensure they are within the battery
compartment area.
5. Close battery compartment cover.
NAVIGATING THROUGH SETTINGS
/ DISPLAYS
After inserting batteries, the unit will automatically
prompt you to set the clock. (Go directly to 'Clock'
section, step 4).
There are 4 settings that need to be set: Alarm / Clock
/ Channel / Location.
1. Press to enter setting mode.
2. Press to navigate to desired setting.
5
10/26/11 12:33:17