How To Use; Using This System - Panasonic SC-HTB8 Owner's Manual

Using this system

Operations
Preparation
≥ Turn on the TV and/or connected device.
SURROUND
CLEAR VOICE
Press [Í] to turn on the main unit.
Select the source.
Press
[INPUT]
[ ]
≥ This remote control cannot be used to control the operations
of the connected devices.
∫ When " " is selected as the source
On the Bluetooth device:
®
Select this system as the output source of the
connected Bluetooth device and start the
®
playback.
∫ When "BD/DVD" is selected as the
source
On the TV and the connected device:
Select the TV's input for this system and start the
playback on the connected device.
If this system does not operate as expected or sound is unusual, returning the settings to the
factory preset may solve the problem. (
§ BD/DVD indicator, Bluetooth
The indicators will not blink when it has reached the maximum or minimum.
≥ If there is sound coming out of the TV's speakers, reduce the volume of the TV to its minimum.
≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically
lower the volume to the middle (50) when the main unit is turned on (Volume limitation).
To turn this function off, refer to page 16.
INPUT
----
PAIRING
To select
"TV" --------------# "BD/DVD"
^--- " ) !-}
" (Bluetooth
®
" " (Bluetooth )
®
indicator and sound mode indicators blink from left to right (i) or from right to left (s) while adjusting.
®
∫ To adjust the volume of this system
Press [i VOL j].
≥ Volume range: 0 to 100
∫ To set the surround mode
You can enable/disable the surround effect.
Press [SURROUND].
≥ To cancel, press the button again.
∫ To set the clear voice mode
With the clear voice mode you can hear dialogs clearer.
Press [CLEAR VOICE].
≥ To cancel, press the button again.
∫ To mute the sound
Press [MUTE].
≥ While muting, all the indicators blink simultaneously.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the main unit is turned off.
p. 17)
§
VQT5J41
15