Disc Section; Video Section - Panasonic SA-PT160GC Service Manual

SA-PT160GC / SA-PT160GCP / SA-PT160GCS / SA-PT160GCT / SA-PT160GS
USB device file system:
USB Port power:

DISC SECTION

Discs played (8 cm or 12 cm):
(1) DVD [DVD-Video, DivX *1, *2]
(2) DVD-RAM [DVD-VR, MP3 *2, *6, JPEG *2, *3, MPEG4 *2,
*4, DivX *1, *2]
(3) DVD-R [DVD-Video, DVD-VR, MP3 *2, *6, JPEG *2, *3,
MPEG4 *2, *4, DivX *1, *2]
(4) DVD-R DL [DVD-Video, DVD-VR]
(5) DVD-RW [DVD-Video, DVD-VR, MP3 *2, *6, JPEG *2, *3,
MPEG4 *2, *4, DivX *1, *2]
(6) +R/+RW [Video]
(7) +R DL [Video]
(8) CD, CD-R/RW [CD-DA, Video CD, SVCD *5, MP3 *2, *6,
WMA *2, *7, JPEG *2, *3, MPEG4 *2, *4, DivX *1, *2]
*1 Plays all versions of DivX® video (including DivX®6) with
standard playback of DivX® media files. Certified to the DivX
Home Theater Profile.
*2 The total combined maximum number of recognizable audio,
picture and video contents and groups: 4000 audio, picture
and video contents and 400 groups.
*3 Exif Ver 2.1 JPEG Baseline files
Picture resolution: between 160 x 120 and 6144 x 4096
pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2, or 4:4:4).
Extremely long and narrow pictures may not be displayed.
*4 MPEG4 data recorded with the Panasonic SD multi cameras
or DVD video recorders.
Conforming to SD VIDEO specifications (ASF standard)/
MPEG4 (Simple Profile) video system/G.726 audio system.
*5 Conforming to IEC62107
*6 MPEG-1 Layer 3, MPEG-2 Layer 3
*7 Windows Media Audio Ver.9.0 L3
Not compatible with Multiple Bit Rate (MBR)
Pick Up:
Wavelength:
CD:
DVD:
Laser power:
CD:
DVD:
Audio Output (Disc):
Number of channels:

VIDEO SECTION

Video system:(
GC/GCS/GCT/GS)
Video system: (GCP)
Composite Video Output:
Output level:
Terminal:
Component video output: [NTSC: 480p/480i, PAL:576p/576i]
WMA (*.wma)
JPEG (*.jpg, *.jpeg)
MPEG4 (*.asf)
FAT12
FAT16
FAT32
500 mA (Max)
785 nm
662 nm
CLASS 1M
CLASS 1
5.1 ch (FL, FR, C, SL, SR,
SW)
PAL 625/50, PAL 525/60,
NTSC
NTSC
1 Vp-p (75 Ω)
Pin jack (1 system)
2
Y output level:
P output level:
B
P output level:
R
Terminal:
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
Mechanism:
This model uses DL2S (Single tray) mechanism.
Power Supply:
This unit uses Switching Mode Power Supply (SMPS).
Refer to their respective original service manuals for *1.
1 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
Pin jack (Y: green, P : blue,
B
P : red) (1 system)
R