Fujitsu PRIMERGY BX900 User Manual page 77

Global User Management Configuring an openLDAP Server
Figure 58: LDAP settings on the management blade
Alternatively MMB configuration can be performed using the SMASH-CLP interface.
Open the BX900 MMB SMASH-CLP interface and navigate to the target
OemFujitsuSiemens/AgentInfo/LdapAuthentication.
The settings are the same as in the WebUI and can be set using the command notation:
set [property]="[value]", e.g. set AgentLdapRootDomainName="testdomain2.local"
A Help command is available for every writeable property, e.g. help AgentLdapType.
Figure 59: LDAP settings using SMASH-CLP interface
ServerView BX900 S1 Management Blade 77