Conference - NEC Univerge DT310 User Manual

3.
Announce the call (optional).
4. Replace the handset.
Using Direct Station Selection (DSS) –
With a call in progress:
1. Press the Transfer key.
2.
Press the programmed DSS.
3. Announce the call (optional).
4.
Replace the handset.
If the called station is busy, replace the
Note 1:
handset to initiate a camp-on. Unanswered
camp-on calls and unscreened transfers will
recall to the transferring station.
To return to the original party, press the
Note 2:
flashing Line key or Conf key.
Note 3: A Programmable Function Key may be
assigned for DSS.
To transfer a call directly to a personal voice
Note 4:
mailbox, dial 8 after dialing the station
number.
2-13 WED
HOLD
InPg ExPg
5:40PM
STA 12345678
P/U

CONFERENCE

1. Establish an intercom or trunk call.
2.
Press the Conf Softkey or the Conference key
(Service Code 851:07).
3.
Dial the extension you want to add.
-OR-
Access an outside call.
To get the outside call, you can either press a
Note:
Line key or dial a trunk/trunk group access
code.
4. When the called party answers, press the
Conference key twice.
If you cannot add additional parties to your
Note:
conference, you have exceeded the system's
Conference limit.
5.
Repeat steps 2~4 above to add more parties.
2-11 MON 10:56AM
TALKING TO
CONF
ICM
AnHd
29
STA 12345
CONF
Dir