MSI P35 Neo series User Manual page 54

M S-7360 M ainboard
[Sergeant]
[Captain]
[Colonel]
[General]
[Commander]
Important
Even though the Dynamic Overclocking Technology is more stable than
manual overclocking, basically, it is still risky. We suggest user to make
sure that your CPU can afford to overclocking regularly first. If you find the
PC appears to be unstable or reboot incidentally, it's better to disable the
Dynamic Overclocking or to lower the level of overclocking options. By the
way, if you need to conduct overclocking manually, you also need to disable
the Dynamic OverClocking first.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This
field will appear after you installed the CPU which support speedstep technology.
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
Advance DRAM Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
Configure DRAM Timing by SPD
Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Auto By SPD] enables DRAM timings
and the following related items to be determined by BIOS based on the configu-
rations on the SPD. Selecting [Manual] allows users to configure the DRAM
timings and the following related items manually.
DRAM CAS# Latency
This controls the CAS latency, which determines the timing delay (in clock cycles)
before SDRAM starts a read command after receiving it.
3-20
2nd level of overclocking, increasing the frequency by 3%.
3rd level of overclocking, increasing the frequency by 5%.
4th level of overclocking, increasing the frequency by 7%.
5th level of overclocking, increasing the frequency by 10%.
6th level of overclocking, increasing the frequency by 15%.