LevelOne WBR-3408 User Manual page 42

PC Configuration
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the
Wireless Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before
making the following changes.
1. The Default Gateway must be set to the IP address of the Wireless Router. To
Downloaded from www.Manualslib.com
Windows NT4.0 - IP Address
or Specify an IP Address, as explained below.
set this:

Click the Advanced button on the screen above.

On the following screen, click the Add button in the Gateways panel, and
enter the Wireless Router's IP address, as shown below.

If necessary, use the Up button to make the Wireless Router the first entry
in the Gateways list.
manuals search engine
42