LevelOne WBR-3408 User Manual page 12

Introduction
Rear Panel
Downloaded from www.Manualslib.com
Wireless Push button for 3 seconds to Enable or Disable the wireless
signal.
On / Off
Button
Reboot Reboot - Press WPS and Wireless On/Off buttons together
or Reset for 5 seconds. The router will restart and boot again.
Reset – Press WPS and Wireless On/Off buttons together for
10 seconds.
All settings will be CLEARED and restored to factory defaults.
Power port Connect the supplied power adapter here.
Connect the DSL or Cable Modem here. If your modem came
WAN port
with a cable, use the supplied cable. Otherwise, use a standard
(10/100BaseT)
LAN cable.
Use standard LAN cables (RJ45 connectors) to connect your
10/100BaseT
PCs to these ports.
LAN connec-
tions
manuals search engine
Rear Panel
12