WARNING Use TOSHIBA/Carrier products for the parts sold separately. Use the products specified by TOSHIBA/Carrier for the parts sold separately, such as the fresh-air chamber, ceiling panel, etc. The use of the products other than specified may cause the water leakage, electric shock, fire, etc.
Page 3
Installation Manual Fresh-air inlet box APPLICABLE MODELS Indoor unit RAV-SP 0UT-UL Fresh-air chamber TCB-GFC1602UUL ACCESSORIES (The following parts are included.) Name Shape Q’ty Name Shape Q’ty Name Shape Q’ty Remark Mounting Outside air screws introduction (7) Wind shield – 0.16” x 0.4” port (4 x 10 mm) Outside air...
Page 4
Installation Manual Fresh-air inlet box Attach the duct flange (3) and the outside air (Fig. 2) introduction port fixing metal (2) to the outside (4) Mounting air introduction port (1) and fix with 8 mounting screws screws (4). (Fig. 2) (1) Outside air introduction port Fix the Fresh-air inlet box set in step 4 to the...
Page 5
Installation Manual Fresh-air inlet box COMFIRMING THE INSTALLATION After the installation completes, perform the test run to confirm that no abnormality is found. For your future reference, please keep the installation manual on your side. Duct connection and installation CAUTION •...
Installation Manual Fresh-air inlet box Installing the duct • Perform the indentation ventilation on the Fresh-air Fresh-air inlet box inlet box using the duct fan shown in the right figure. CAUTION Sound insulation chamber • Confirm the processed outside air should be ranged from 54°F to 86°F (12 to 30°C).