Ltr Operation; Receiving A Call - Icom IC-F3061T/S Instruction Manual

4

LTR OPERATION

■ Receiving a call

D Group call
q Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select the LTR system channel or talk group.
w When a call is received;
• 'BUSY' indicator lights green.
e Push and hold [PTT], then speak into the microphone at a
normal voice level.
r Release [PTT] to return to receive.
D Selective call (DTMF call)
q Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select the LTR system channel or talk group.
w Push [Call] to mute the channel.
e When receiving a call, the calling station name appears
and a beep is emitted. Then the mute is released.
• " " appears.
002 ch-03
fH 173.7M
DTMA DTMR DTMA DTMR
*:Depending on the pre-setting.
12
Appears
PHN SET
D Phone call
• Receive a phone call
q Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select the phone channel of LTR system chan-
nel.
• " " appears.
w When a phone call is received (transceiver rings), push
[PHONE] (or push [PTT]).
• " " blinks.
Blinks
002 ch-03
fH 173.7M
DTMA DTMR DTMA DTMR PHN SET
e Push and hold [PTT], then speak into the microphone at a
normal voice level. Release [PTT] to return to receive.
r After conversation is finished, push [PHONE] (or while
pushing and holding [PTT], push [#]) to disconnect the
phone call.
• " " stops blinking.