Stopping The Snowmobile - Polaris 600 IQ Widetrak Owner's Manual

Restarting an Engine
If the rider stops the engine by pushing the engine stop switch down,
restart the engine using the normal starting procedure. If the engine fails
to start using the normal procedure:
1. Push the engine stop switch down to the OFF position.
2. Turn the key to the OFF position.
3. With both switches OFF, squeeze and hold the throttle in the wide
open position.
4. Crank the engine several times to clear the engine.
5. Release the throttle.
6. Restart the engine using the normal starting procedure.

Stopping the Snowmobile

The following chart lists methods for stopping the snowmobile. See
page 70 for more information about the engine stop switch.
SYSTEM
Ignition Switch
Brake
Engine Stop Switch
WHAT IT DOES
Interrupts ignition circuit
Slows jackshaft
Interrupts ignition circuit
OPERATION
THROTTLE
CONDITION
All
All
All
67