send an SMS to friends or relatives simultaneously.
•
Go to Settings > Switch Setup > Switch to enable or disable this feature. This
feature is disabled by default.
•
Go to Settings > Switch Setup > Switch Number to program a phone number and
up to four SMS numbers.
1. The first location will define the voice call number
2. Locations from 2 to 5 will define the SMS number(s)
•
Go to Settings > Switch Setup > Switch SMS This field
to send a text message.
•
If you have enabled this function and programmed Switch numbers, by pushing
down the Switch Key the phone will initiate a call and send an SMS message(s) to
the pre-defined numbers. The Alert tone may continue (depending on the Tone
sound level setup) until the Switch key is pushed back to the up position.
•
When the call is connected the handset automatically enables Handsfree
(speaker-phone) mode.
•
The phone will sound an alert tone when enabled
•
The alert tone sound level (volume) can be adjusted to Off, Low, Medium or Loud
•
In any state, push the Switch key up to return the phone to standby mode.
•
If the keypad is locked, the phone will still activate Switch Dialling when you push
down the Switch key.
M ake and receive a call
5.3
2 3 B 2 4 B 2 4 B 2 4 B 2 4 B
2 5 B 2 5 B 2 5 B 2 3 B
•
Enter the phone number using the number keys and press the Green key to dial. If
you enter a wrong digit use the Red Key to delete the mistake. Long press the Red
key to clear all the characters.
m st
19
u
be completed in order