Ice-O-Matic EMF 450 Series Specifications

✓
Produces up to 552 lbs. (251 Kgs.)* of ICE per day
✓
Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓
Only 16 inches wide
✓
Available with an air-or water-cooled condenser
ICE-O-Matic
Hard Water, Food Safety and Tight Spaces
Problem
Tight-Fitting Spaces
Kitchen space utilization
Poor Ice Quality
Ice is too wet and soft
Operating Environments
Built to last?
Dirty Air Filter
Forget to change the air filter?
*Rated at 70 ° (21°) Air / 50° (10°) Water
®
is the Best ICE Making Solution for:
®
EMF 450 Series
Flake ICE Maker
Solution
Maximum ICE
Maximum ICE production in a minimum amount of space:
• No additional side clearance required on a
30 inch wide bin
• Maximum ICE production in a 16 inch wide cabinet
• Works on all industry dispensers and bins
Dependable ICE
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermaket or restaurant applications.
ICE-O-Matic ® Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Filter-Free Air
No air filter to change
EMF 450 on a B55 Bin