Installation
Installing the Speaker Mounting Plate
0° Mounting Plate
The Installation section describes:
•
Installing the Speaker Mounting Plate
Attaching the Speaker to the Mounting Plate
•
•
Removing the Speaker from the Mounting Plate
•
Attaching a Secondary Support Cable
The SM 3 speaker comes with two types of speaker mounting plates:
0° plate — The 0° plate allows the speaker to be mounted flat on a vertical wall with
•
the speaker protruding less than four inches (ADA compliant) from the wall surface (see
the illustration below).
0° Mounting Plate
•
10° mounting plate — The 10° mounting plate allows the speaker to be installed at
a 10 degree angle so that the speaker can be pointed down from an elevated position
(see the illustration below).
10° Mounting Plate
10° Mounting Plate
SM 3 User Guide • Installation
3