Table of Contents
Advertisement
1.
Once a voice call has been established with Party A, press Options and select Call the
Third Party.
2.
The dialing window will appear. Enter the phone number of Party B and press Send.
3.
When the Party B answers the call, you will be connected with Party B only. Party A will
remain on hold.
4.
To activate the three-way call, press the Send Key again. You will be able to converse
with both parties simultaneously.
5.
Press the Send Key again to end the call with the Party B. You may press the End key
to end both calls.
Call Waiting
Your phone can accept phone calls while another call is active. You can manage the phone's
call waiting feature as follows:
1.
If you receive a call during an active conversation, the phone will prompt that there is an
incoming call and allow you to accept or reject the call.
2.
Press Yes on the left soft key to accept the call.
3.
After accepting the call, you will be connected with the second caller, while the first party
is put on hold. You may switch between callers by pressing the Send Key again, or by
selecting Options→Swap.
4.
Press the End Key to disconnect from the active caller.
Note: When the End Key is pressed both the active and holding user will be disconnected.
If the holding user remains on the call your phone will ring again. You may accept or reject
the call.
42
Advertisement
Table of Contents
