Powering On/Off Your Phone; Unlocking Your Phone; Connecting To The Network - Zte txtster CDMA 1X EVDO User Manual

Hide thumbs Also See for txtster CDMA 1X EVDO:

Table of Contents

Powering On/Off your Phone

To power on the phone, press and hold the End key for at least 3 seconds. If the handset lock

code has been activated, the phone will prompt to enter the code. The default password is

1234. Once you have activated your handset, the lock code will be the last 4 digits of your

phone number.

To power off the phone, press and hold the End key for at least 3 seconds from standby

mode.

Warning: Do not power the phone on when wireless phone use is prohibited, or when it may

cause interference or danger.

By setting the handset lock code, you can protect your phone against unauthorized use. To

unlock the phone, enter the handset lock code and then press the OK key.

Note: If you forget your handset lock code, contact your service provider.

After your phone is unlocked, it will automatically search for the network.

Table of Contents