Setting The Away Temperature - Bryant Preferred T6-NRH Owner's Manual

OPERATING THE THERMOSTAT

Setting the away temperature

1. Press the away button located under the display in the
center. You will see a triangle icon (B) above the away
button.
2. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
3. To change the heating settings, press the mode button
until you see the word heat on the screen on the left.
4. Press the up or down button on the right until you reach
the desired temperature setting. The arrow pointing to
the away button will disappear.
5. Press and hold the away button for about three seconds.
The away arrow will be displayed, indicating that the
thermostat has saved your settings.
6. To change the cooling temperature setting, press the
mode button repeatedly until you see the word cool on
the screen on the right.
16