The extent pools will take on either a server 0 or server 1 affinity at this point, as shown in
Figure 9-42.
Figure 9-42 View of Define properties panel
Click Next and Finish .
9.3.6 Creating FB volumes from extents
Under Simulated Manager , expand the Open systems section and click Volumes .
Click Create from the Select Action pull-down and click Go . Follow the panel directions with
each advancing window.
Choose the extent pool from which you wish to configure the volumes, as shown in
Figure 9-43 on page 186.
Chapter 9. The DS Storage Manager: Logical configuration
185