Profile Settings; Band Settings - D-Link DIR-457 User Manual

Portable router

Hide thumbs Also See for DIR-457:

Table of Contents

Section 4 - Device Setup using D-Link Connection Manager (MAC OS)

The Profile Settings page allows you to manually change your Band and Network setting in case your DIR-457 can not automatically

connect to your network provider.

The DIR-457 supports two band selection options:

Automatic - The DIR-457 automatically selects the band based on

the networks available in current area and those supported by the

DIR-457.

UMTS/HSUPA Only - Restricts the DIR-457 to using 3G service on

UMTS/HSUPA bands.

GSM/GPRS/EDGE Only - Restricts the DIR-457 to using 2G service

on GSM/GPRS/EDGE bands.

To adjust the band settings follow the instructions below:

1. Click the Profile button.

2. Select Band tab.

3. Select Automatic, UMTS/HSUPA only, or GSM/GPRS/EDGE only.

4. Click Apply and OK.

D-Link DIR-457 User Manual

Profile Settings

Table of Contents