Step Screw (Quantity) M2 × 3 Mm, Flat-Head, Nylon-Coated - Lenovo V580 Hardware Maintenance Manual

Removal steps of hard disk drive assembly
1
Remove the screw , then pull the tab in the direction shown by the arrow
Step Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
Remove the hard disk drive from the slot in the direction shown by the arrow
When installing: Ensure that the hard disk drive connector is attached firmly.
1
2
.
Color Torque
Black
1.85 kgf-cm
3 .
.
Chapter 7 Removing and replacing a FRU
51