1070 Lcd Unit - Lenovo S20-30 Touch Hardware Maintenance Manual

Lenovo S20-30 / S20-30 Touch Hardware Maintenance Manual

1070 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1020 Hard disk drive" on page 36
• "1030 PCI Express Mini Card for wireless LAN/WAN" on page 38
• "1040 Fan assembly and Heat Sink assembly" on page 40
• "1050 Keyboard" on page 42
• "1060 System board" on page 44
Figure 8. Removal steps of LCD unit
Remove four screws
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
48
a
Step Screw (quantity)
a
M2.5 × 4 mm, flat-head, nylok-
coated (4)
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
.
a
a
Color
Black
a
a
Torque P/N
1.85 kgfcm 90202952